Kok Meng Lee
·Paper Publications
- [1] 27.Liu, C.-H. and K.-M. Lee, "Topology Optimization with Explicit Dynamic Finite Element Analysis for Compliant Mechanism Design of an Automated Live Bird Transfer System," Applied Mathematics Information Sciences Special Issue, pp. 173S-181S, February 2013..
- [2] 26.Li, Y., C. Cai, K.-M. Lee and F. Teng, "A Novel Cascade Temperature Control System for a High-Speed Heat-Airflow Wind," IEEE/ASME Trans. on Mechatronics Focused Section on Aerospace Mechatronics, Vol. 18, no. 42013, 1310-1319..
- [3] 25.J. Guo and K.-M. Lee, "Compliant Joint Design and Flexure Finger Dynamic Analysis using an Equivalent Pin Model," Mechanism and Machine Theory 70 (2013) 338-353..
- [4] 24.H. Son and K.-M. Lee, "Control System Design and Input Shape for Orientation of Spherical Wheel Motor," IFAC Control Engineering Practice 24, pp.120-1288, 2014..
- [5] 23.Y. Chen, K.-M. Lee, C.-Y. Lin and X. Fu, "Lumped-parameter Modeling of an Immersion Flow Field for Analyzing Meniscus Dynamic Behavior," ASME J. of Dyn. Syst., Meas. and Control Vol 136, no 1, 011001-1~8, 2014..
- [6] 22.K. Bai and K.-M. Lee, "Direct Field-feedback Control of a Ball-joint-like Permanent-magnet Spherical Motor," IEEE/ASME Trans. on Mechatronics. Vol. 19, no 3, 2014, 975-986..
- [7] 21.J. Ji, K.-M. Lee, J. Guo and S. Zhang, "Discrete Deformation Models for Real-time Computation of Compliant Mechanisms in Two and Three Dimensional Space," IEEE/ASME Trans. on Mechatronics Vol. 19, no.5, 2014, pp. 1268-1278..
- [8] 20.Wang, D., K.-M. Lee, J. Guo and C.-J. Yang, "Adaptive Knee Joint Exoskeleton based on Biological Geometries," IEEE/ASME Trans. on Mechatronics Vol. 19, no.4, pp. 1268-1278, 2014..
- [9] 19.Lim, J.-Y. and K.-M. Lee,"Distributed Multi-Level Current Models for Design Analysis of Electromagnetic Actuators," IEEE/ASME Trans. on Mechatronics, DOI: 10.1109/TMECH.2014.2382532, Vol. 20, No. 5, pp. 2413-2424, 2015..
- [10] 18.Guo, J., K.-M. Lee, W. Liu and B. Wang, "Design Criteria based on Modal Analysis for Vibration Sensing of Thin-wall Plate Machining," IEEE/ASME Trans. on Mechatronics, DOI: 10.1109/TMECH.2014.2360371 Vol. 20, No. 3, pp. 1406-1417, 2015..